Preparing The Measurement - Beurer medical BM 45 Manual De Instrucciones

Information on the display:
1. Date / time
2. Systolic pressure
3. Diastolic pressure
4. Calculated pulse value
5. Pulse symbol
6. Release air (arrow)
7. Number of memory space/memory display average
value ( ), morning (
8. Battery replacement symbol
9. User memory
10. Classification of measurements
11. Cardiac arrhythmia symbol
11
10
9
8
7 6 5
), evening ( )
1
2
3
4

4. Preparing the measurement

Inserting the batteries
• Remove the battery compart-
ment lid on the rear of the
device.
• Insert four 1.5 V AA (alkaline
type LR 06) batteries. Make sure
that the batteries are inserted
the correct way round. Do not
use rechargeable batteries.
• Close the battery compartment lid again carefully.
If the battery replacement symbol
played, you can no longer perform any measurements and
must replace all batteries. Once the batteries have been
removed from the device, the date and time must be set again.
Any saved measurements are retained.
• The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to
dispose of the batteries.
• The codes below are printed on batteries con-
taining harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
Setting the hour format, date and time
This menu allows you to set the following functions, one after
another.
Hour format
➔
20
4 x 1,5V AA (LR06)
is permanently dis-
Date Time
➔