Publicidad
Idiomas disponibles
Idiomas disponibles
Time programming function
This function may be used in two different ways:
to automatically switch off a hotplate.
■
as a timer.
■
Turning off a hotplate automatically
The zone turns off automatically once the selected time has
elapsed.
Programming the cooking time.
The hob must be switched on:
Select the hotplate and the desired power level.
1.
Press the
3
symbol. The
2.
up.
‹‹
is displayed on the time program function display.
Press the + or - symbol. The basic setting appears:
3.
+ symbol: 30 minutes.
- symbol: 10 minutes.
Press the + or - symbol until the desired cooking time
4.
appears.
After a few seconds, the cooking time begins to elapse.
Note: The same cooking time can be automatically
programmed for the all the hotplates. The programmed time
passes independently for each of the hotplates.
The Basic settings chapter provides information on
automatically programming the cooking time.
Keep warm function
This function is used for melting chocolate or butter and for
keeping food warm.
To activate
Select the hotplate.
1.
Within the next 10 seconds, press the
2.
The indicator
–
lights up.
The "keep warm" function will have been activated.
Cleaning lock function
Cleaning the control panel while the hob is switched on may
change the settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
"
symbol. A signal sounds. The
along with the
"
symbol. The control panel is locked for
24
x
indicator on the hotplate lights
symbol.
–
Ú
indicator lights up
Changing or cancelling the time
Selecting the hotplate . Press the
cooking time with the + or - symbols, or set to
Once the time has elapsed
The hotplate switches off. A warning signal sounds and
appears for 10 seconds in the time program function display.
The
indicator on the hotplate lights up. Pressing the
x
symbol turns off the indicators and stops the beeping.
Notes
If cooking times have been programmed for various
■
hotplates, the time programming function always displays the
time for the selected hotplate.
Any cooking time can be programmed for up to 99 minutes.
■
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
No hotplate should be selected.
Press the
symbol.
3
‹‹
1.
time program function display
Press the + or - symbols. The basic setting appears.
2.
+ symbol: 10 minutes.
- symbol: 5 minutes.
Set the desired time using the + or - symbols.
3.
After a few seconds, the time will start to elapse.
Changing or cancelling the time
Press the
symbol several times until the
3
up. Change the time or set it to
Once the time has elapsed
A warning signal sounds.
function display. After 10 seconds the indicators turn off.
Pressing the
symbol turns off the indicators and stops the
3
beeping.
To deactivate
Select the desired hotplate.
1.
Press the
symbol.
–
2.
The
–
indicator disappears.
The hotplate turns off and the residual heat indicator appears.
35 seconds. The control panel surface can now be cleaned
without the risk of changing the settings.
Note: The lock does not affect the main switch. The hob may
be switched off when desired.
symbol and change the
3
.
‹‹
and the symbol are shown in the
W
indicator lights
W
with the + or - symbols.
‹‹
is displayed on the time program
‹‹
‹‹
3
Publicidad
