Oehlbach FALCON HD Manual Del Usuario página 10

3. If the image is unstable or pixel errorrs occur:
· Position the Falcon HD transmitter and receiver in such a way that the triangular indicators are poin-
ting towards each other. This guarantees the best possible transmission quality.
· It is possible that other electrical devices (e.g. wifi routers, microwaves, etc.) may interfere with the
signals from the Falcon HD. For this reason, position the receiver and transmitter in such a way that
they are far enough away from high-frequency emitting electronics.
· The distance between the transmitter and receiver can be too great or there are interfering objects or
walls in the way. Try to find an alternative installation location.
4. If the IR transmission for the remote control does not work:
· Check that the IR emitter is connected correctly to the transmitter and is positioned in such a way that
the signal can reach the IR diode of the source device. The IR emitter should be positioned as close as
possible to the IR diode.
· The IR transmission function of the Falcon HD operates at a frequency of 30...60 kHz. A few remote
controls use a different transmission frequency, with the result that the transmission from Falcon HD is
not supported.
Remarks
Please observe the following instructions in order to prevent any risk of fire, short-circuits or damage to
the product:
1. Do not expose the product to rain or moisture. Do not place any containers filled with water on the
product.
2. Do not install the product in a bookcase, fitted cupboard or similarly enclosed spaces. Please ensure
that there is sufficient ventilation for the product.
3. You should not cover the product or place items on the product in order to prevent short-circuits or
fire due to overheating.
4. Do not place the product in proximity to sources of heat, e.g. heaters, stoves, etc.
5. Do not use the product in proximity to naked flames or candles.
6. Only use a dry cloth to clean the product.
7. Disconnect the power plug during a thunderstorm or if the device is not used for a longer period of
time.
8. Protect the power cable against external forces such squeezing, crushing or impact.
9. Use the accessories provided only
10. Please only use qualified service personnel to carry out repairs or servicing work.
10