Descargar Imprimir esta página

Koenic KCH 200 Manual De Instrucciones página 16

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
English
Attention
Always ensure the appliance is disconnected
from the power supply before it is fully and
correctly assembled!
Danger of hand injury! Handle the blades
with care when you remove, disassemble and
clean them, as they are very sharp!
Never use your hands to reach into the filling
chute and through the blade cover. Always
use wooden or plastic spatulas, and only
when the salad maker is not running.
Do not use this appliance for processing ice,
or hot liquids.
Select a stable flat surface.
Pre-cut the food into small and even pieces.
Only fasten the stainless steel inserts with
the same type.
Assembly and operation
Warning
Before assembly, always set the switch to
off position to switch off the appliance and
disconnect the plug from power socket.
Mount the filling chute on the motor unit.
1
2
Refer to the and
unit.
Rotate the filling chute in an anti-clockwise
3
direction until it clicks in place.
4
Attach a pair of suitable stainless steel
inserts to the blade attachment.
Fasten the same type of stainless steel
5
inserts on the blade attachment.
16
IM_KCH200_150209_V07.indb 16
symbols on the motor
Mount the blade attachment to the filling
6
chute.
7
Secure the blade attachment in place.
Mount the blade cover on the filling chute.
8
Refer to the and
unit.
9
Rotate the blade cover in an anti-clockwise
direction until it clicks in place.
Insert the food pusher into the filling chute.
10
11
Connect the plug to a suitable power
socket.
12
Set the switch to on position.
Insert ingredients into the appliance. Gently
13
push the food down the filling chute with
the food pusher.
14
During operation, never use your hands to
reach into the filling chute and through the
blade cover. Always use wooden or plastic
spatulas, and only when the appliance is
not running.
Changing stainless steel inserts
Warning
Before changing inserts, always set the
switch to off position to switch off the
appliance and disconnect the plug from
power socket.
• Disassemble the appliance by following
steps
11
to
4
.
• After inserts have been changed, follow
step
to
for re-assembly.
4
11
Cleaning and care
Warning
Before cleaning, always set the switch to
off position to switch off the appliance and
disconnect the plug from power socket.
symbols on the motor
2/9/15 5:49 PM

Publicidad

loading