Operation - Medisana WL 460 Instrucciones De Manejo

GB

3 Operation

3.5
Night light
3.6
Activate an
alarm
3.7
Short time
alarm
3.8
Demo /
Snooze /
Quick Check
12
By pressing button
minutes. If you press button
minutes. Pressing button
While the night light function is activated you can press button
remaining time.
With the Alarm-button
on the rate of keystrokes, AL1 (for alarm1) and/or AL 2(for alarm 2) are
displayed and are activated therewith. With the fourth press on the Al-
4
arm-button all alarms will be deactivated.
In the last 30 minutes before an activated alarm starts, the brightness
slowly adjusts to the brightness set for the alarm time. The volume selec-
ted for the alarm time, increases from the start of the alarm (when the
alarm time is reached) to the set value within 60 seconds. The regular
alarm is only activated, if there are more than 30 minutes between the
time when the alarm is set and the time at which the alarm is supposed to
be triggered. If there is less than 30 minutes between the time when the
alarm is set and the time at which the alarm is supposed to be triggered,
the alarm function will start 60 seconds before the setting time. Pressing
t
the Off button switches off the alarm - the settings will be kept for the
next day. The alarm automatically switches off after 30 minutes.
With the Zizz-button
short break). Pressing the button once sets an alarm to begin after 15
minutes. Each further press of the button extends the alarm time by 15
minutes (until max. 90 minutes). It starts the countdown to the desired
alarm time once the icon stops flashing.
Pressing the Off button
switches off after 30 minutes.
With the Demo / Snooze / Quick Check-button
ent functions depending on the current state of the device settings:
1. In case of deactivated alarm:
Demonstration function for all light and sound effects. The entire demo
process takes about 1 minute.
2. In case of set / activated alarm function:
Quick-Check function to check the settings of the alarm function. After dis-
play of all values, the Quick-Check function will be closed automatically.
3. In case of activated and effected alarm:
Snooze funcion. When the button is pressed within 30 minutes before
the set alarm time, the wake up function (including light and sound) will
stop until the setting time.
Then it takes only 1 minute for light and sound to reach the setting de-
gree. If you press the Demo / Snooze / Quick Check-button
30 minutes after the setting time, the device will wake up after 5 minutes
delay. Each time pressing the button stops the wake up function for fur-
ther 5 minutes. The maximum to extend the alarm time is 30 minutes.
q
you activate the red night light (sunset) for 30
q
again the timer will be set to 60 , resp. 90
q
the fourth time will deactivate the night light.
4
you activate alarm1 and/or alarm 2. Depending
5
you can set a short time alarm (e.g. for taking a
t
switches off the alarm. The alarm automatically
9
to see the
1
you can select differ-
1
within
G
G
G