Publicidad
Idiomas disponibles
Idiomas disponibles
Instructions for use
Fill
1. Take the kettle out of the base unit.
2. Add cold water up to the 'MAX' mark.
3. It is not recommended to add less than 0.2 liters to prevent the kettle from running dry and
damaging the appliance.
Switched on
1. Once you have filled the reservoir with water, place it on the base plate.
2. Plug the kettle into the mains.
3. Flip the switch to the ON position, the light will illuminate.
Off
1. When the water has boiled, it will automatically turn off.
2. Do not force the ON/OFF button to turn it off.
3. Unplug from the mains.
Environmental Protection
Waste electrical production should not be disposed of
with household waste.
Please recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice.
Publicidad
