Descargar Imprimir esta página

cecotec IRONHERO 1200 MANNEQUIN DRY Manual De Instrucciones página 39

Maniquí de secado y planchado para todo tipo de prendas

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 30
2.
Attach a counterweight clamp on the end of each sleeve. Fig. 20
Place two counterweight clamps at the bottom centre (back and front) of the shirt. Fig. 21
3.
Tips for use
-
The drying/ironing process should last between 15 and 30 minutes for best results.
However, the duration may vary depending on the material and thickness of the garment.
It is advisable to start the process with a short time setting and increase it if necessary.
-
The balloon can be enlarged or reduced in size with the help of the zips on the sides. For
small sizes, the zips must be closed. For large sizes, the zips must me opened.
-
Shirts with large buttons may cause the button band to slightly crease during ironing. In
this case, it is advisable to manually re-iron the button band.
4. CLEANING AND MAINTENANCE
-
Unplug the device from the mains and let it to cool down completely before cleaning.
-
Never immerse the device in water or other liquids.
-
Never use caustic or abrasive cleaning agents to clean the device, as they could damage
the surface.
-
If necessary, you can clean the device and the balloon with a slightly damp cloth and a little
neutral detergent. Wipe them with a dry cloth. Both balloons can be machine-washed.
-
Allow all parts to dry completely before storing them.
-
Store the device and all its accessories in a dry, clean, and safe place, where it is protected
from direct sunlight and out of the reach of children or animals.
5. TROUBLESHOOTING
WARNING:
Do not attempt to repair the device yourself. If the problem persists after the checks explained
below, contact a qualified electrician, authorised personnel, the store where you purchased
the product, or the official Cecotec Customer Service.
The device
The plug is not correctly inserted into the socket. Plug it in correctly.
does not
The socket is damaged. Try another socket.
work. The
Check the fuse of the mains connection.
LED light
The device wasn't switched on. Set the timer to any value to check.
does not turn
on.
IRONHERO 1200 MANNEQUIN DRY
ENGLISH
39

Publicidad

loading