Loading the racks
Before loading the racks, remove all food residue from
crockery and empty liquids from glasses and cups.
After loading the appliance, make sure that the sprayer
arms can rotate freely.
Lower rack and cutlery basket
The lower rack can hold pans, lids, plates, salad bowls, cutlery, etc.
Large plates and lids should ideally be placed at the sides of the rack.
Several dishwasher models are fitted with tip-up sections
which can be used in a vertical position when arranging plates
or in a horizontal position when arranging saucepans, salad
bowls and frying pans.
The type of cutlery basket may vary (modular or non-modular)
according to the dishwasher model. The non-modular basket must
only be positioned at the front of the lower rack.
Knives and other utensils with sharp edges must be
placed in the cutlery basket with the points facing
downwards, or they must be positioned horizontally in the tip-
up compartments on the upper rack.
*
Only available in selected models. The number and position
may vary.
Upper rack
Load this rack with delicate and lightweight crockery: glasses,
cups, saucers and shallow salad bowls.
Adjustable position tip-up compartments
*
,
Adjusting the height of the upper rack
In order to make it easier to arrange the crockery, the upper rack
may be moved to a higher or lower level.
WHEN THE RACK IS EMPTY.
NEVER raise or lower the rack on one side only.
Both are fitted with
grilles over the top,
for improved
cutlery arrange-
ment.
Items that should not be washed in the dishwasher
• Wooden items, objects with wooden or horn handles or glued-
on parts.
• Items made from aluminium, copper, brass, pewter or tin.
• Items made from plastic material which is not heat-resistant.
• Antique or hand-painted porcelain.
• Antique silver. Silver that is not antique may, however, be
washed in the dishwasher using a delicate wash cycle,
provided that it does not come into contact with other metals.
safe.
Some dishwasher models are fitted
with a sliding tray
to hold serving utensils or small cups.
For optimum washing performance,
avoid positioning bulky crockery
directly below the tray.
The height of the upper rack should ideally be adjusted
Open the left and right guide rail stops and
pull out the rack; position it higher or lower
as required, slide it along the guide rails
until the front wheels are in place and close
the stops ( see figure ).
If the rack is fitted with Dual Space
*
( see figure ), pull out the upper
handles
rack until it reaches its stop point, grip the
handles at the sides of the rack and move
it upwards or downwards, then slowly let it
fall back into place.
We recommend the use of crockery which is dishwasher
The tip-up compartments
can be positioned at different
heights, to optimise the
arrangement of crockery
throughout the rack. Wine
glasses can be placed
safely in the tip-up
compartments, by inserting
the stem of each glass into
the corresponding slots.
*
which can be used
17
EN