EZiclean Cyclowash Ultimate Manual Del Usuario página 12

②
①
Press the clean water
tank cover to remove
it from the brush unit.
ON / OFF button and
automatic cleaning
Speeds
METHOD 1:
Open the cap of the
clean water tank.
Align the clean water
tank in the slots of the
brush unit and press
until you hear a «click».
STARTING YOUR DEVICE
FILL THE TANK WITH CLEAN WATER
Fill the measuring cup with clear, cold water.
Caution: Using warm or hot water may damage
Pull the roller brush
latch out and up to
remove it from the
brush assembly.
1/ Press the ON/OFF button to start the machine. The
default speed is the minimum speed. Press the ON/
OFF button again to turn off the unit.
2/ Press the Speed button to change the speed.
3/ Place the product on its storage base, plug it in
and press the ON/OFF button to start the automatic
cleaning of the roller brush.
the appliance.
②
①
Align the first end of
the roller brush with
the slot and then put
the other end of the
brush in the slot of the
brush block to reinstall
the roller brush.
F i l l t h e ta n k w i t h
clean water using the
measuring cup.
②
①