EZiclean Cyclowash Ultimate Manual Del Usuario página 15

CLEANING THE FILTER AND ITS HOUSING
Remove the filter
from the dirty water
tank.
CLEAN THE CLEAN WATER TANK
②
①
Remove the clean
water tank from the
brush unit.
CLEANING THE ROLLER BRUSH
②
①
Press the clean water
tank cover to remove
it from the brush unit.
MAINTAINING YOUR APPLIANCE
Remove the dirty
water tank cap.
Clean the clean water
tank with clean water
②
①
Align the clean water
tank in the slots of the
brush unit and press
until you hear a «click».
Separate the two parts by
rotating them.
It is recommended to clean the clean
water tank regularly to ensure its proper
functioning.
Remove hair with a pair
of scissors or a sharp
object. Do not run the
brush under water to
avoid damaging the
motor.
Clean all parts with
clean water and leave
to dry for 24 hours.
②
①
Align the first end of
the roller brush with
the slot and then put
the other end of the
brush in the slot of the
brush block to reinstall
the roller brush.