Dirna Minicool Compact Night & Day Manual Del Usuario página 9

Function
F0 Manual Operation of the equipment, at intermediate power.
EN
P0 Manual Operation , Maximum power.
F0; t
he user can choose the comfort temperature and change the speed of the unit blower manua-
lly. If the engine is running or the engine starts running, the unit will automatically change
onto the P0 mode within a short period of time.
NOTE:
This P0, function cannot be selected manually . It is activated automatically by the unit.
When the motor is stopped, this function can also be activated automatically by the unit, if the
unit detects that the batteries are fully charged. The unit will remain in this mode for a while and
then it will change onto the selected F0 mode.
The comfort temperature is controlled by briefly pressing the
Blower speeds are controlled by holding down the
appear on the display: V1, V2, V3, V4, V5
Function F1 - Digital thermometer function .
In this function, the Minicool Minicool Compact Night & Day will indicate on the screen the tempera-
ture inside the cabin.
Function F2 - Time Programming Function.
F2 programmes the unit to disconnect automatically during a period of time between 1 and 9
hours. To programme it, keep the On/ Off key
the operating time with the
Function F4 Automatic Operation of the Unit, at intermediat power
p4 Automatic Operation of the unit at maximum power
When selecting F4 , the symbol CA will appear on the display alternating between the selected
temperatures.
The user can choose the comfort temperature manually. With this function, the unit regulates au-
tomatically its performance parameters until the chosen comfort temperature is achieved. If the
engine is running or the engine starts running, the unit will automatically change onto the
P4 mode within a short period of time.
NOTE:
This P4 , function cannot be selected manually. It is activated automatically by the unit.
When the motor is stopped, this function can also be activated automatically by the unit, if the
unit detects that the batteries are fully charged. The unit will remain in this mode for a while and
then it will change onto the selected F4 mode.
The comfort temperature is controlled by briefly pressing the
.
pressed until F2 appears on the screen, select
keys and confirm by pressing On/ Off
9
(15/ 27 ºC)
keys
keys, the following symbols will
.
keys (15/ 27 ºC)