PMC KTP EVO Serie Manual De Utilización página 23

INTERPRETATION OF THE MARKINGS (#6)
Harness KTP EVO (#6-A)
1
Ref : Product reference.
2 S/N: Serial number (Manufacturing
date – Manufacturing batch)
3
Pictogram requesting to read the
instructions before use.
4
Date of manufacture.
5 Expiry date.
6
Manufacturer's logo.
7 Product standard.
8
Manufacturer's address.
9 Identification of the notified body
Automatic retracting fall arrester for KTP EVO 9
Pictograms of use (#6-B)
1
Pre-use visual inspection.
2
Do not release the lanyard. Ensure
that the lanyard is secure before use.
3
Maximum weight authorized at 140kg.
4 Usable anchor point. Unremovable fall
arrester in reverse position for the
KTP EVO 9. The EN795 anchor point
is connected at the end of the lanyard.
5 Restrict the pendulum effect.
6
Do not use above movable materials.
7 Do not load the cable reel on an edge.
8 Do not use in horizontal configuration.
9
Do not modify the device.
This product is compliant with Regulation 2016/425.
The declaration of conformity is available at: www.pms-ind.com.
APAVE SUD EUROPE SAS (N°0082) – CS 60193 – F13322 MARSEILLE CEDEX 16
AFNOR CERTIFICATION (N°0333) - 11, rue Francis de Pressensé - FR 93571 LA PLAINE SAINT DENIS Cedex
Notified body for UE type examination :
Notified body for production control :
23
that intervened in the inspection and
production phase.
10 CE Marking.
11 Maximum clearance (for KTP EVO 2,
KTP EVO 4 and KTP EVO 6).
12 Maximum lanyard length without
connectors (for KTP EVO 2, KTP EVO 4,
KTP EVO 6 and KTP EVO 11).
Maximum length of the retractable
lanyard for KTP EVO 9.
10 Temperature of use.
11 Store in a protected area.
12a Dated label.
12b Periodic examination follow-up.
13 CE Marking / Notified body no.
14 Follow the instructions for use.
15 Tested in configuration factor 2
16 The fall arrester must be connected to
a EN361 fall arrest harness