•
Do not use temperatures higher than those indicated on the garments to be
treated.
Temperature and steam status are shown on the screen (C), when both values
remain steady this indicates that the iron is ready for use, it will also beep when it
reaches its setting.
To select the various programs just turn the digital screen to the left or right
depending on whether we wish to increase or decrease the program number, the
program will change with a slight turn. Left decreases, right increases. (Fig. 2) once
turned, the dial will return to position.
Given that the soleplate can take a long time to cool, we recommend starting off
with delicate garments and then increasing the program setting.
PROGRAMS
•
0 Off
1 Antisheen, special setting to avoid creating sheen on dark garments.
•
•
2 ECO setting, the most efficient, optimised for cost-effective ironing.
•
3 Delicates; ironing directly on T-shirts with printed decals and any delicate
garment.
•
4 AUTO; single setting suitable for all type of ironing, except for very delicate
garments.
•
5 Ironing shirts and cotton garments
6 Denim jeans and heavy cotton
•
•
7 Linen; fabrics that are difficult to iron.
•
8 TURBO; Maximum temperature and steam flow for ULTRA FAST ironing.
If garment has various kinds of fibres, select the temperature for the fibre that
requires the lowest temperature. (For example, select the temperature for polyester
for an article made out of 60% polyester and 40% cotton).
Temperature and steam status are shown on the digital display.
SENSOR HANDLE
•
The 270IR is equipped with a presence sensor (F) that instantly shuts off the
steam outlet if the handle is not being held. This leads to energy savings and
increased autonomy of the water tank (lower water consumption).
•
Steam flow is automatically re-established by holding the handle on the iron
•
Removing your hand from the handle does not switch off the selected steam
function, it only interrupts the steam flow temporarily until it detects that
the handle is being gripped again.