Publicidad
Idiomas disponibles
Idiomas disponibles
Attaching eStore
7
Attaching eStore
!
WARNING!
Do not secure the eStore using straps, or similar, passing over the
plastic eStore cover. This will result in damage to the unit.
I
NOTE
If you use multiple connected eStores: configure and mark eStore
number on each eStore before installation in the vehicle, see
chapter "Connecting multiple eStores" on page 17.
Observe the following instructions on installation location
eStore should be installed vertically and on a flat and stable surface.
eStore must not be installed close to combustible materials.
The installation location should be protected from moisture and dust.
Leave at least 20 mm of space around eStore and ensure good ventila-
tion, taking care to ensure extreme low temperatures are avoided during
winter operation.
For safety reasons, note the location of existing wiring harnesses, wires
and other components within the installation area, in particular those
which are not visible, when installing the eStore (when drilling or screwing
etc.).
If you install more than one eStore, leave at least 1 cm of space between
the eStores.
➤ Select a suitable location and secure eStore safely.
➤ Use the integrated fixing feet to secure the eStore when mounting
(fig. a 1, page 6).
14
eStore
EN
Publicidad
