Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
Control Panel
When you connect the hob to mains, you will hear a short beep and sensors will be locked.
Touch and hold
Important!
Do not place any objects on the sensors as this could cause an error. Always
keep touch sensors clean.
Turn on the hob and a cooking zone
Important!
The hob is on when you activate a cooking zone.
Touch
to turn on the hob and a se-
lected cooking zone. Active cooking zone
display will show "0." Now set the desired
heat setting using the
sensors (see Set the heating power)
If none of the sensors is touched within 10 seconds, the appliance switches itself off.
If child lock function is activated, the appliance cannot be switched on (see "Release
the child lock").
Set the heat setting
When the power is set to "0" you can adjust
it using the
or
When both cooking zones operate and you
need to adjust heat setting of the first cooking
zone. Briefly touch
to adjust the heat setting.
for 3 second to release the lock.
and
touch
sensor.
and then touch
or
38
Publicidad
