WolfPack M1B-YH8-82X2 Manual De Instrucciones página 18

(A) Proper setting
Blade edge is even with sole.
(B) Wrong setting
-Uneven lines
Reason: One of the two blade edges is not even with the sole
-Sunken front
Reason: Blade edge and sole are not parallel. Blade is too low.
-Sunken back
Reason: Blade edge is higher than sole
ADJUSTING THE CUT DEPTH
The planer depth can be adjusted from 0 to 2mm.
Figure 3
To increase the planing depth, turn the depth adjustment knob clockwise.
To decrease the planing depth, turn the adjusting knob counter-clockwise.
CAUTION
Before using the tool, be sure that an external dust collecting device (e.g. a vacuum cleaner)
has been properly connected to the dust-collection opening of the tool.
Depth adjustment knob
18