CANGAROO ELEGANCE XN-D211 Instrucciones De Uso página 15

Follow the figures shown for assembly of the product in order to ensure its correct assembly:
Step 1: Put the silicone valve (fig. 8) in the lower end of the pump body. Make sure it is fixed properly around
the edges of the pump body opening, intended for it. Warning! If the valve is loose or not properly installed,
not enough vacuum can be created!
2. Step 2: For better fix of the pump, put the feeding bottle (10) in its base (6). Turn it gently in clockwise
direction so that the groove of the bottle fits exactly the groove of the body of the pump.
3. Step 3: Carefully put the piston (4) in the pump body. Make sure the fit is tight around the edges of the
opening of the pump's body, intended for it.
4. Step 4: Put the protective cover at the upper part of the pump body. Press and turn in clockwise direction so
it fits in the correct position.
5. Step 5: With clean hands put the silicon piston (2) in the pump body (6). Make sure that it fits tightly. Advice:
If you are not going to use the breast pump, place the dust cover (1).
6. Step 6: Put one end of the tubing(5) in the pump body(6). After that put the other end of the tubing in the
pumping motor of the pump (9). Now you can use the breast pump.
 WARNING! DO NOT STERILIZE AND DIP INTO WATER THE PUMPING MECHANISM AND THE AIR TUBE, THAT
CONNECTS THE MECHANISM TO THE PUMP' BODY – PART 5.
We advise to use this option first use this option and then switch to expression mode.
The massage mode imitates baby suckling, not too strong and stimulates milk flow. The expression mode also
imitates baby suckling, but stronger than the first mode, more even and with great efficacy.
Press the button for selection of mode and activate the massage function. With "+" and "-" buttons you can
adjust the stimulation levels. They are 10 in total. With the frequency button – the frequency levels. They are
3 in total.
B. Expression:
Press the button for selection of mode and activate the expression function. With "+" and "-" buttons you can
adjust the levels of expression. They are 15 in total. With the frequency button – the frequency levels. They
are 3 in total.
VII. ASSEMBLY OF THE ELECTRIC BREAST PUMP
VIII. USAGE INSTRUCTIONS
1.Wash your hands thoroughly and make sure your breasts are clean. Squeeze a little
breast milk from each breast to ensure there's no blockage. Make sure your breast
pump is sterilized and properly installed.
2.Relax in a comfortable chair, leaning slightly forward (use cushions to support your
back).
3. Place the pump on your breast and turn the pumping motor on.
A.Massage (stimulation):
This function helps the stimulation of the milk flow.
14