Project Source U1884R Instrucciones De Ensamblaje página 10

ASSEMBLY INSTRUCTIONS
13. Mount the door on the cabinet by connecting the
hinges on the door to the mounting plates on
the box. Use the Hinge guide below for detailed
instructions.
If the adjustments to the door are needed,
instructions are available on page 10 of this manual.
Hinge guide
105 o Hinge
14. YOU'RE FINISHED – ENJOY
Hinge Adjustment:
Side adjustment:
Using a Phillips screwdriver, rotate
screw (1) clockwise to move the door
left and counter-clockwise to move the
door right. Moves the door up to 2 mm.
Depth adjustment:
Using a Phillips screwdriver, rotate screw
(2) clockwise to move the door forward
and counter- clockwise to move the door
backwards. Moves the door up to 2 mm.
13
14
Height adjustment:
Using a Phillips screwdriver, rotate
screw (3) clockwise to move the door
upward and counter-clockwise to
move the door downward. Moves
the door up to 2 mm.
10
Door Assembly