Project Source U1884R Instrucciones De Ensamblaje página 7

ASSEMBLY INSTRUCTIONS
4. Insert the minifix cam lock in the correct positions
based on the illustration. Please note the arrow mark
should face the bore hole as per the illustration.
Hardware Used
Minifix cam lock
AA
5. Using a phillips head screwdriver, attach the
mounting plate as shown in the illustration.
Hardware Used
FF Hinge mounting plate
6. Insert the hinge in the bore hole. Using a phillips
head screwdriver, turn the pre-installed screws
clockwise to lock into place.
Hardware Used
GG 105 o Hinge
4
x 20
5
x 5
6
x 5
7
AA
FF
GG