Absaar PRO 8.0 Manual De Instrucciones página 5

Technical details
The lcd display gives you the most important informations
There are several charging mode. It can be used as charging mode 12V STD for 12V lead acid
and gel batteries, 12V AGM for 12V agm batteries, as well as 24V STD for 24V lead acid and gel
batteries. Every mode can be changed into wintermode when you push the mode button another
time the snow flake icon appears and the winter mode is on and you can charge batteries in low
temperatures.
The voltmeter shows the current charging voltage and the battery symbol the current charging
status.
There are three icons for malfunctions
- Icon left corner shows wrong polarity please change the connection of the clamps
- Icon in the middle shows defect battery, please let the battery be tested by a mechanic and if
necessary change the battery
- Icon right corner shows bad connection please check the connection between the charger and
the battery
Charging
1. Connect the charger to the battery, first the red clamp to plus and then the black clamp to minus
2. Connect the charger to 230V socket
3. Push the mode button to choose the charging mode according to your battery needs
4. The charging will start automatic after a few seconds
5. When the charging is done the display shows FUL and the charger will switch to maintenance
mode
Warranty
We offer you a two year warrant for our chargers
Please contact the dealer where you have bought your ABSAAR charger and show him the invoice
as a proof of warranty.
Warranty claims without invoices can't be handled.
EN
OVER 40 YEARS OF GERMAN TECHNOLOGY
5