Publicidad
Idiomas disponibles
Idiomas disponibles
26. Cooling down the milk
Turn on the water for cooling down the milk. The time of cooling depends on the tempera-
ture of the water.
ERRORS
On display is shown „ER2" or „ER3" and the Pasteurizer doesn't work:
Pull the plug and and call the authorised service - do not repair it yourself!
SAFETY AGAINST OVERHEATING
In case that in the secondary container is not enough water or the temperature of the se-
condary water rises over 100°C, the security switch switches off all functions of the device.
In this case you have to check which step from the manual was not done properly. This
mistake has to be removed - usually there is not enough secondary water in the Pasteuri-
zer. The secondary water must always reach till mark „MAX" written in the Pasteurizer.
RESTART
1.
Wait that the Pasteurizer cools down
2.
Remove milk container
3.
Put the Pasteurizer askew
4.
On the bottom you can see an iron pole - push on it
5.
Start once again with the procedure from the manual
33
Publicidad
