Sagem PHOTO EASY 160 Manual Del Usuario página 29

Liasse AZUR_GB.book Page 25 Jeudi, 21. avril 2005 4:09 16
The message " Ir " blinks on the printer screen throughout the transfer
operation.
Once the transfer is complete, the following information is displayed
alternately on screen:
You can now:
• Start printing the transferred photograph, after setting the print format
and number of copies if required.
• Or, transfer another photo from your device, which is then added to the
photo(s) already stored in the printer. At the end of each transfer, the
total number of photographs stored is displayed on the printer screen
(the one with the highest number being the last one transferred).
• The same operations as described in the previous chapters can now be
performed before starting to print the photographs: (selecting the
photographs to be printed, selecting the format, selecting the number of
copies).
You can now:
• Start another print job, after selecting different parameters (photograph
number, format, number of copies) if required.
• End the transferred photograph processing. To do this, hold the
key down for 2 seconds.
- 25 -
C