N-Gear LGP JUKE 101 Manual De Operación página 8

Directions for use:
1. Wireless pairing
1.1 Turn on the speaker before using wireless pairing ,it default wireless mode playing when turn on the
speaker.
1.2 Search for bluetooth ID "LGP Juke 101" to pair and connect .The speaker will have a voice prompt
after connected successfully .
2. Indicator instruction :
The Indicator is located on this" "button .
Wireless searching status : White lights flashes quickly about 0.5s/time
Wireless pairing status : white light is always on
Playing status: the white light flashes slowly about 1 second/time
3. Charging indicator:
The red light will be on under charging status ; the red lights will be off after fully charged
4.Voice prompt
4.1 Three is a voice prompt when turn on /turn off the speaker
4.2 When the volume increase to the maximum volume ,there will be a voice prompt. There is no voice
prompt reduce to minimum volume.
4.3 It will ring 3 times after detecting 3.4V lower power ,then turn off.
5.Mode switching
5.1 It default wireless mode playing when turn on the speaker
5.2 Mode switching:When the TF card ,U-disk ,AUX all mode insert on speaker at the same time, long
press tws button to switch the playing mode.
Note: The playing sequence will be from Wireless mode - TF card mode - U disk mode - AUX mode .