Laica ISEO Serie Instrucciones Y Garantía página 15

• Power supply specifications:
for the HI1000 model (2-slice toaster): 220-240V ~ 50-60Hz 750-880W,
for the HI1040 model (4-slice toaster) 220-240V ~ 50-60Hz 1500-1760W
• Plug type: CEE 7/7
• Environmental working conditions: +10°C +40°C; relative humidity ≤95%
• Environmental storage conditions: +5 °C +45 °C; relative humidity ≤95%
INSTALLATION
A short power cable is provided to reduce the entanglement or tripping hazards associated with
a long cable. Extension cables can be used, provided that they are used with great care. If an
extension cord is used, the electrical rating of the detachable power cable or extension cable shall
be at least equal to that of the appliance. The extension must have an earthed 3-wire cable. The
extension cable shall be arranged so that it does not hang from the worktop or table as it could be
pulled by children or pose a tripping hazard.
USING THE APPLIANCE FOR THE FIRST TIME
1. Remove the packaging material, especially from the toasting slots. Do not remove the stickers.
2. When using the product for the first time, clean it as described in the "Cleaning and
maintenance" paragraph.
3. Insert the crumb tray into its housing.
4. Place the toaster on a flat, solid, non-flammable, heat-resistant surface in a well aired room,
away from the edge of the worktop and curtains.
5. Check that the toasting start lever is fully up and connect the appliance to a power socket.
6. Use the dial to select the maximum toasting level (6) and lower the lever fully to start the
toaster, without inserting any food.
Caution! The lever only remains down when the appliance is connected to the power socket.
Operating it empty for the first time serves to eliminate any dust that may have settled inside
the appliance. During this procedure, there may be a slight smell and some smoke. This
is normal and harmless, and is due to dust that may have settled in the appliance.
If this persists, contact the dealer.
7. The lever returns up automatically when the time has elapsed. The toaster is now ready for use.
USING THE PRODUCT
1. Place the toaster on a flat, solid, non-flammable, heat-resistant surface in a well aired room,
away from the edge of the worktop. Always check that the crumb tray is in its housing.
2. Slice the bread (recommended size 12x12 cm, maximum thickness 2.5 cm) and remove the crumbs.
3. Check that the toasting start lever is fully up and connect the appliance to a power socket.
4. Insert the slices of bread into the toasting slots.
5. Use the dial to select the desired toasting level, from 1 (light browning) to 6 (dark browning).
When using it for the first time, we recommend a medium toasting level, position 3 or 4.
6. Lower the lever fully to start the toaster; the light in the
will show the selected toasting level (a), the remaining toasting time (b) and the "toaster"
function (c).
EN
English
IT
Italiano
FR
Français
DE
Deutsch
ES
Español
OPERATING INSTRUCTIONS
15
English
Italiano
Français
Deutsch
Español
button will turn on, and the display
EN
IT
FR
DE
ES