Publicidad
Idiomas disponibles
Idiomas disponibles
Installation (continued)
9
Checking for leaks
□ Once the installation is complete, remove the spray head
(H) from the spray hose (E) to flush the water lines.
□ Turn on the water supply and allow both hot and cold water
to run for at least one minute to flush away debris that
could cause damage to internal parts.
□ While the water is running, check for leaks. If a leak
occurs, gently tighten the nut on the connection that is
leaking.
□ Turn off the water and screw the spray head (H) back onto
the spray hose (E) of the faucet body (A).
Care and Cleaning
□ Clean periodically with a soft cloth. Avoid abrasive cleaners, steel wool, and harsh chemicals as these will dull the finish and void
your warranty.
E
H
8
A
E
Publicidad
