MRA KAWASAKI Z650 2017 Instrucciones De Montaje página 3

GB
Read this manual carefully and check the parts list for completeness before you begin. We recommend
Number
1 MRA screen
1 Brackets, 1 pair
4 Oval head screws, M5 x 16 mm
4 Rubber nuts, M5
4 Plastic washers, 12 x 5 x 0.5 mm
1 Edge protection strip with end sleeves
How to mount the screen onto your motorbike:
1. Stand your motorbike up on a level surface.
2. Dismantle the original screen.
3. Mount the brackets onto your motorbike using the M5 x 16 mm oval head screws and
neoprene washers (P1).
4. Insert the rubber nuts through the brackets (P2).
5. Mount your MRA screen onto the brackets using the screws from the original screen.
6. Line up your MRA screen along the midline of your motorbike, and tighten up the screws.
7. Slide the edge protection strip onto the exposed rear edge of the screen, starting where
the screen meets the fairing and ending on the other side of the screen. Cut any
overhang off.
8. Slide the end sleeves over the end of the edge protection strip, and gently squeeze the
sleeves with a pair of pliers to secure it (3).
After installation, check that all of the screws are tight; tighten them up if necessary. Repeat this at
regular intervals. Clean the screen with water, neutral soap and a sponge. Do not use solvents, alcohol or
MRA-Klement GmbH Siemensstr. 6 D-79331 Teningen Tel.: +49 7663 93890 Email: info@mra.de
Thank you for buying a MRA Windshield.
that you have your screen fitted by an authorised workshop.
Article
spirits to clean the screen as they will damage it.
MO UN T IN G IN STR UC T ION S
Kawasaki Z650 17-
Article No..
--- Allen keys, 3 and 4 mm
11232
10554
10629
10635
---
3
Required tools