Bond Summit HYFP40205-1 Manual Del Usuario página 7

4. Once the tank is attached to the regulator,
make sure the propane gas tank sits on the
metal stand inside body (B) completely. Turn the
preassembled wing screw on the outer part of
metal stand clockwise to secure the propane gas
tank tightly.
B
5. Replace door (C) onto the body (B).
C
B
6. Remove the rubber cap on the electronic igniter
(J) by unscrewing and slide battery (H) into the
battery slot. Make sure the positive side of the
battery faces outwards. Screw the electronic
igniter cap (J) over the battery tightly.
J
H
1-866-771-2663 | Page 7