Publicidad
Idiomas disponibles
Idiomas disponibles
Downloaded by: pm_clarallort on 13-07-2023 15:26 CEST
⋅ Weight: 0.396kg
⋅ Sound pressure level (LpA) = 62 dB(A), KpA =
3dB
⋅ Sound power level (LwA) = 73 dB(A), KwA =
3dB
⋅ Vibration (a
) = 0,39 m/s
h
⋅ NB: These specifications are subject to change
without notice of purpose of improvement.
⋅ NB: By virtue of the conditions of fabrication of
this product, the maximum absorbed power can
differ from that specified.
⋅ NB: By virtue of the conditions of fabrication of
this product, the maximum used power can
differ from that specified.
FOR EU PRODUCT VERSIONS AND/OR IN CASE THAT IT IS REQUESTED IN
YOUR COUNTRY:
ECOLOGY AND RECYCLABILITY OF THE PRODUCT
The materials of which the packaging of this appliance consists are included in a collection,
classification and recycling system. Should you wish to dispose of them, use the appropriate public
recycling bins for each type of material.
The product does not contain concentrations of substances that could be considered harmful to the
environment.
This symbol means that in case you wish to dispose of the product once its working life
has ended, take it to an authorised waste agent for the selective collection of Waste from
Electric and Electronic Equipment (WEEE).
This symbol means that product may include a battery or batteries; user must to remove
them before disposing of the product. Remember that batteries must be disposed of in
duly authorised containers. Do not dispose of them in fire.
Li-ion
HOW TO REMOVE THE BATTERIES FROM THE INTERIOR OF THE DEVICE:
CAUTION: It is important that the batteries are fully discharged prior to its withdrawal from the
apparatus.
To remove the batteries, once the life of the appliance, proceed as follows:
Open the top shell of the apparatus, removing previously with the help of a screwdriver all the fixing
screws (Fig.1)
Identify the battery wires and cut them. To avoid risks of a short circuit with a possible residual battery
load, first cut the Red wire and protect it by using insulating tape, then proceed to cut the black wire
proceeding in the same way.
Safely remove the battery from its housing.
ENGLISH
2
, K= 1.5 m/s
2
The noise and vibration emission values declared
in this information sheet have been measured
according to EN 62841-1 and may be used to
compare one tool with other. They may also be
used for a preliminary assessment of exposure.
Warning: The vibration and noise emissions
during actual use of the power tool can differ from
the declared values depending on the ways in
which tool is used, especially what kind of
workpiece is processed.
It's necessary identify safety measures to protect
the operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when
it is running idle in addition to the trigger time).
Publicidad
