BaByliss G940E Manual página 58

pressed against your skin.
Make sure the 'Ready' light is lit.
If after 10 seconds the 'Ready' light is still off , switch your Homelight epilator off and on again by
˜
pressing the 'ON/OFF' button twice.
If the problem persists, contact the BaByliss customer service in your area.
˜
Make sure the 'ON' indicator light is lit.
If it is lit, switch your Homelight epilator off and on again by pressing the 'ON/OFF' button.
˜
If the problem persists, contact the BaByliss customer service in your area.
˜
The 'ON/OFF' indicator light is red and is fl ashing
The appliance has switched to the safety mode because it has detected that it is overheated or
˜
there is a critical problem (broken fan, capacitor problem, etc.). Under circumstances like these,
switch the appliance off and allow it to cool for 15 minutes before switching it on again.
If the problem persists, contact the BaByliss customer service in your area.
˜
The 'ON/OFF' indicator light will fl ash green/red alternately.
The adapter being used to connect your Homelight appliance to the mains is not that supplied
˜
with your appliance or it is defective.
If the problem persists, contact the BaByliss customer service in your area
˜
The ON/OFF indicator light is red.
The appliance has reached its end of life.
˜
Opening your Homelight epilator could expose you to dangerous electrical parts and the energy of
the pulsed light, which could cause serious physical injury and/or irreversible eye injury.
Opening your Homelight epilator could also damage the appliance and will void the warranty.
Please contact BaByliss customer service if your appliance is broken or damaged and requires repair.
9. Customer Service
For more information on Homelight products, please visit
If your device is broken, damaged, needs repair or if you need any assistance, please contact BaByliss
customer service.
60
Do not attempt to open or repair your Homelight epilator yourself.
Only certifi ed repair centres are authorised to make repairs.
www.babyliss.com