Casals CID2050B Manual Del Usuario página 12

fire or temperature above 130ºCmay cause
explosion.
Follow all charging instructions and do
not charge the battery pack or tool outside
the temperature range specified in the
instructions. Charging improperly or at
temperatures outside the specified range may
damage the battery and increases the risk of
fire.
Remove the batteries from the appliance if you
are not going to use it for some time.
Disconnect the battery charger from the mains
when not in use and before undertaking any
cleaning task.
Do not open the battery/ies under any
circumstances whatsoever.
When the battery/ies is not in use, keep it away
from other metal objects like paper clips, coins,
keys, screws ... that could connect a terminal
to another.
The battery/ies should be stored at a
temperature of below 40ºC.
SERVICE
Have your power tool serviced by a
qualified repair person using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
Never service damaged battery packs.
Service of battery packs should be only be
performed by the manufacturer or authorized
service providers.
Any misuse or failure to follow the instructions
for use renders the guarantee and the
manufacturer's liability null and void.
DRILL SAFETY WARNINGS
1) SAFETY INSTRUCTIONS FOR ALL
OPERATIONS
Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss.
Use the auxiliary handle(s), if supplied with
the tool. Loss of control can cause personal
injury.
Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory or fasteners
may contact hidden wiring. Cutting
accessory or fasteners contacting a "live" wire
may make exposed metal parts of the power
tool "live" and could give the operator an
electric shock.
2) SAFETY INSTRUCTIONS WHEN USING
LONG DRILL BITS
Never operate at higher speed than the
maximum speed rating of the drill bit.
At higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting the
workpiece, resulting in personal injury.
Always start drilling at low speed and with
the bit tip in contact with the workpiece.
At higher speeds, the bit is likely to bend if
allowed to rotate freely without contacting the
workpiece, resulting in personal injury.
Apply pressure only in direct line with the
bit and do not apply excessive pressure.
Bits can bend causing breakage or loss of
control, resulting in personal injury.
ADDITIONAL SAFETY WARNINGS
Do not use the appliance if the cable or plug is
damaged.
Ensure that the voltage indicated on the
charger rating label matches the mains voltage
before plugging in the charger.
Connect the appliance to a socket that can
supply a minimum of 10 amperes.
Connect the appliance to a mains socket with
an earth provision.
Only use the appliance with the specific
adaptor provided.
If any of the appliance casings breaks,
immediately disconnect the appliance from the
mains to prevent the possibility of an electric
shock.
Do not use the appliance if it has fallen on the
floor, if there are visible signs of damage or if it
has a leak.
Do not touch the plug with wet hands.
Do not use the appliance if its accessories are
not properly fitted.
Do not use the appliance if the accessories
attached to it are defective. Replace them
immediately.
Use the appliance handle/s, to catch it or move
it.
This appliance is for household use only, not
professional, industrial use.
This appliance is not a toy. Children should be
supervised to ensure that they do not play with
the appliance.