Publicidad
Idiomas disponibles
Idiomas disponibles
Attaching the TV to a desk
(optional)
(Depending upon model)
If mounting the TV on a table, make sure it is
installed according to the method outlined in
'Attaching the TV to a desk' .
The TV should be attached to a desk so it cannot
be pulled in a forward/backward direction,
potentially causing injury or damaging the
product.
[TYPE 1]
4-Screws
(Not provided as parts of the product.)
Stand
NOTE
• Screw: M5 x L (*L: Table depth + 8~10 mm)
ex) Table depth: 15 mm, Screw: M5 x L25
[TYPE 2]
2-Screws, 2-Washers, 2-Nuts
(provided as parts of the product.)
8
Using the kensington security
system
(Depending upon model)
The Kensington security system connector is
located at the rear or stand of the TV. For more
information of installation and using, refer to the
manual provided with the Kensington security
system or visit http://www.kensington.com.
Connect the Kensington security system cable
between the TV and a table.
Securing the TV to a Wall
(optional)
Desk
1 Insert and tighten the eye-bolts or TV brackets
2 Mount the wall brackets with the bolts to the
3 Connect the eye-bolts and wall brackets tightly
Stand
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
wall. Match the location of the wall bracket and
the eye-bolts on the rear of the TV.
with a sturdy rope or cable. Make sure to keep
Desk
Publicidad
