Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
5
3. Operating Audio Functions
ENG
Key Sequence
Display
If the control unit is off, a brief press on the
ON/OFF key
will gradually turn on the unit
(between 1 and 2 seconds).
on
The LED will display the word "ON"
When the control unit is off, the LED will be OFF.
Increase/decrease in the signal volume: The LED will
vol 58
flash to indicate the desired change in volume.
Increase/decrease in bass/treble levels: The LED will flash
BAS+06
to indicate the desired change in the bass/treble levels.
MUTE
Mute: the unit becomes silent (mute activated)
Loudness: It reinforces the bass level in terms of the signal volume, assuming a
LD on
greater backing at a lower volume and a lesser backing at a higher volume.
Mono/stereo reception: When activated, this feature allows the FM stations to be received in
stereo. When cleared, this feature only allows for mono reception.
STEREO
Note: If the control unit's configuration is mono (see Installation Sheet supplied with this kit), the
signal will always be received in mono even if the signal received by the antenna is in stereo.
CC-1128-05.1
Publicidad
Tabla de contenido
