Publicidad
Idiomas disponibles
Idiomas disponibles
.. Connecting a device via Bluetooth®
In Bluetooth mode, you can receive wireless audio signals from an external Blue-
tooth-enabled audio output device. Make sure the two devices are not more than
metres apart.
Only one Bluetooth device can be paired with the party speaker at a
time.
To connect a Bluetooth-enabled audio output device, proceed as follows:
Switch on the party speaker.
Press the
BT is shown on the display and the device is in search mode. The Bluetooth LED
flashes quickly during the search.
The party speaker attempts to automatically connect itself to the last au-
dio output device connected via Bluetooth. If this is not possible, the de-
vice remains in search mode.
Switch on the Bluetooth function on your audio output device and activate
search mode on it to pair the two devices.
You will find more information about the Bluetooth function of your au-
dio output device in its user manual.
The device name of the party speaker "MD " will be displayed in the device list
on your audio output device as soon as the signal is found.
Select the party speaker and pair the two devices. If you are prompted to enter a
password, enter "".
Device pairing is complete when the Bluetooth LED continuously lights up and a
signal tone sounds on the party speaker.
Start audio playback on your audio output device or press the
on the party speaker.
When signals are being transmitted via Bluetooth, it may not be possible
to control all operating functions using the buttons on the party speak-
er.
We also recommend setting the volume on your audio output device to maximum,
and fine-tuning the volume on the party speaker.
To disconnect an existing Bluetooth connection, press the
button several times as required to switch to Bluetooth mode.
button
button.
Publicidad
