Taurus PARADISO CERAMIC 1000 Instrucciones De Uso página 12

Ensure that neither the air inlet or outlet become
totally or partially covered by drapery, clothing,
etc., as this increases the risk of fire.
In the event of installation in the bathroom,
position the wall fitting so that the base, socket,
power supply cable, switches or other con-
trols cannot be reached by a person in a bath,
shower or washbasin.
The appliance must be fixed to a wall. The
minimum distance between the bottom of the
appliance and the floor is 15 cm. (Fig.1).
The appliance needs to be correctly ventilated in
order to operate correctly. Leave a space of 35
cm above it and 15 cm on both sides.
Do not cover or obstruct any openings in the
appliance.
The plug must be easily accessible so it can be
disconnected in an emergency.
For greater efficiency, the appliance must be
installed in a location in which the ambient
temperature is between 12 to 32ºC.
To achieve the highest efficiency from the
appliance and so as to be able to install the
appliance on a cold wall (an exterior wall) and
below a window. But never obstructing or cove-
ring a ventilation area.
The appliance should work well with its wall sup-
port attached or with its base/feet attached.
The appliance is equipped with a wall bracket
(Fig2), which must be fixed to the wall.
Fig.1
Fig. 2
FIXING TO THE WALL (FIG.3):
The appliance has a wall support (FIG2) to sup-
port the product.
Using the drilling template, mark the position of
the fixing dowels on the wall, taking into account
the above-mentioned distances between the
device and the wall.
Drill on the marks and introduce the plugs (Fig.3).
Fit the support, lining up its holes with those of
the plugs, and screw on (Fig.3).
Make sure that the bracket is firmly fixed; it
should be able to support twice the weight of the
appliance.
Fit the appliance into the wall support.
Secure the radiator to the bracket using the
screws provided (Fig. 4).
Fig.3
Fig.4