Genie LA 300 A4 Instrucciones De Funcionamiento página 9

Clearing a blockage of the film
1. This machine is equipped with a film blockage function in order to resolve any
blockage of the film. Such function is featured by ABS button on BACK SIDE
of the laminator.
2. Please switch off the machine immediately by setting the switch to "O" and pull
out the plug from the mains socket outlet, let the machine to cool down briefly
(for hot laminating) and push the 'ABS' anti-film blockage button on back as
direction indicated by the arrow sign, whenever there is a blockage of the film.
3. Hold the ABS switch firmly with one hand and pull out the film completely from
the machine's feed opening or delivery opening with the other hand.
4. After you have resolved the blockage of the film and released the ABS switch,
this will go back to its starting position again. Now you can use the machine
again completely.
5. Please contact our service hot line if there is a blockage of the film again.
Cleaning and care
1. Switch off the unit.
2. Please pull out the plug from the mains socket outlet always, in order to clean
the machine. Take care while doing so that the plug does not come into
contact with any liquids.
3. Allow the machine to cool down before cleaning it.
4. Clean the surface of the housing with a soft, dry, lint-free cloth. Do not use any
solvents or cleaning agents.
Delivery
Laminator GENIE LA 300 A4
Instruction manual
Technical data
Mains voltage (V)
Consumption
Laminating width
Film of utilizable thickness
Foil size
ABS function
Heating rollers
Heating up time
Laminate
Speed
Dimensions (W x H x D)
Weight
Packing (W x H x D)
220-240 >VAC, 50 Hz, 1.3 A
300 W
330 mm
80 - 125 Micron
A4 max.
Yes
2
3 Min
Hot lamination
400 mm / min
455 x 157 x 63 mm
approx. 1.35 kg
468 x 160 x 66 mm
9