NORAUTO NO0854 Manual De Usuario página 34

PART LIST
EN
1 Ventilation slots
2 Handle
3 Power cords
compartment
4 Lid latch
5
Lid
6 Connection cable for
AC connection
7 Connection cable for
DC connection
8 Cooling capacity
control dial
OPERATION
NOTES:
• Before using the product, wipe it inside and outside with a damp cloth for hygienic
reasons.
• Secure that your cooler is well ventilated so that any heat created can dissipate.
Otherwise, proper functioning cannot be guaranteed. Do not to cover the air vents.
• Ensure that food or liquids in glass containers are not excessively refrigerated. Liquids
expand when they freeze and can therefore destroy the glass containers.
• Fill the cooler with food and beverages which have already been refrigerated.
• Do not open the cooler more often than necessary.
• Do not leave the lid open longer than necessary!
USING THE COOLER IN AC OR DC MODE
1. Place the device on a firm base.
2. Put desired products in the cooler.
3. Take out the AC power cord or DC connection cable from the power cord compartment
and fully unwind it.
4. For DC connection: Prior to plugging in the DC connection cable to the socket, turn on
the ignition. It prevents a power surge that can lead to the unit overheating and/or
becoming a potential fire risk. Connect the DC connection cable to the cigarette lighter
or the DC socket in the vehicle. The red LED diode will light up.
For AC connection: Connect the mains plug to an easily accessible socket.
5. The device starts cooling the interior.
6. For DC connection: To switch off the cooling device, disconnect the DC connection
cable.
For AC connection: To switch off the cooling device, disconnect the AC plug.
COOLING CAPACITY CONTROL DIAL
When the cooler is connected to an AC mains supply, it can be used in three different
operating modes:
• MIN mode: the cooler consumes the minimum energy.
• ECO mode: the cooler consumes less energy.
• MAX mode: the cooler consumes the maximum energy.
TIP: It is recommended to use the ECO mode to conserve energy.
34
1
5
4
2
3
6
8
7
MAX
MIN