Publicidad
STEP 17
6
ameriwoodhome.com
8
6
(x12)
(x4)
With the help of someone else, carefully turn the unit over on its front
side. Position back panel as shown. Start with attaching back panel to
rear legs (J&L) with screws (6) but do not fully tighten screws. Flush
bottom edge of back panel with bottom edge of shelf (E) and nail
straight into back edges of top (C) and shelf (E) as shown. Now tighten
screws (6).
BACK
PNL
E
L
24
IMPORTANT! THE BACK PANEL IS A STRUCTURAL PART
OF THIS UNIT AND MUST BE INSTALLED PROPERLY.
Assure that our unit is square.
Distance from corner to corner
must be equal as shown.
8
J
Publicidad
