Silverline 624327 Manual Del Usuario página 16

EN
Troubleshooting
Problem Possible cause Solution
No power Check mains connection
No function when ON/OFF Trigger
Switch (5) is operated
Defective ON/OFF Trigger Switch Replace the ON/OFF Trigger Switch at an authorised Silverline service centre
Stopped working after some Switch OFF the tool and let it cool down to room temperature. Ensure motor vents
Tool is overheating
operation time are clear
Blade teeth worn Replace blade
Poor cutting
Blade damaged Replace blade
Incorrectly fitted blade Refit blade
Loose blade Tighten blade securing bolt
Check and if possible retighten, otherwise have repaired by an authorised Silverline
Vibration or abnormal noise Other part of tool has worked loose
service centre
Accessory incorrectly fitted or loose Correctly fit accessory
Track Fine Adjustment Cams (9 & 12) incorrectly tension Tension correctly to reduce vibration and improve cutting performance
16