Topcom BABYVIEWER KS-4245 Manual Del Usuario página 7

Babyviewer KS-4245
12.3 Registering the parent unit with the baby unit
– Switch the baby unit off.
– Cover the light sensor with a black cloth and switch the
baby unit on. The Power LED on the baby unit flashes
quickly for approximately 15 seconds.
– With the parent unit switched on, press and hold the play
button for a few seconds.
18
– An icon appears in the display.
– Press the menu button
– "C1 ...." Appears initially, then "C1 .... OK". When a
connection is established, the image viewed by the lens
appears in the display.
If "C1 .... X" appears (registration failed), it may
be necessary to remove the batteries from the
baby unit for a few seconds before trying again.
13 Storage and disposal instructions
We recommend that you keep the box and
packing materials so you can use them to
transport the equipment in the future if necessary.
13.1 Storage
Remove the batteries (regular or rechargeable) from the parent
unit and the baby unit.
Store the equipment in a dry location.
13.2 Waste disposal of package materials
The package materials are environmentally friendly
materials that can be given to your local waste collector
for recycling.
13.3 Waste disposal (environmental protection)
Dispose of the equipment in accordance with the
provisions of European Directive 2002/96/EC, Waste
Electrical and Electronic Equipment (WEEE),
regarding discarded electrical and electronic
equipment. Contact your municipal waste disposal
department for information.
Dispose of batteries (regular or rechargeable) in an
environmentally friendly manner in accordance with local
regulations.
14 Technical data
Frequency 2,4GHz
Range Outdoors: up to 300 m (Line of
sight)
Indoors: up to 50 m
Operating temperature 0°C to 40°C
20% to 75% relative humidity
Parent unit
Display 3,5" (8,8 cm) TFT LCD
Rechargeable batteries Included battery pack:
AC mains adapter Manufacturer: G. Credit
Model: 5E-AD060080-E
Input: 100~240V AC, 50/60Hz,
0,2A Max
Output: 6 V DC / 800 mA
Dimensions approx. 137 x 84 x 60 mm
Weight 125 g (without rechargeable
batteries)
Baby unit
Image sensor Colour CMOS
Lens f 4.4mm, F 3.0
Night vision 4 Infrared LED
Batteries 4 Alkaline cells (LR03/AAA) (not
included)
to confirm the selection.
23
– SKL BL-50C
– Li-ion
– 3,7V 1100 mAh
AC mains adapter Manufacturer: G.Credit
Model: 5E-AD060080-E
Input: 100~240V AC, 50/60Hz,
0,2A Max
Output: 6 V DC / 800 mA
Dimensions approx. 86 x 100 x 125 mm
Weight 132 g (without batteries)
15 EC conformity declaration
Tristar hereby declares that this device is in compliance with the
essential requirements and other relevant provisions of Directive
1999/5/EC.
The declaration of conformity can be found at www.tristar.eu
16 Tristar warranty
16.1 Warranty period
The Tristar units have a 24-month warranty period. The warranty
period starts on the day the new unit is purchased. There is no
warranty on standard or rechargeable batteries (AA/AAA type).
Consumable or defects causing a negligible effect on operation or
value of the equipment are not covered. The warranty has to be
proven by presentation of the original or copy of the purchase
receipt, on which the date of purchase and the unit-model are
indicated.
16.2 Warranty exclusions
Damage or defects caused by incorrect treatment or operation
and damage resulting from use of non-original parts or
accessories are not covered by the warranty. The warranty does
not cover damage caused by outside factors, such as lightning,
water and fire, nor any damage caused during transportation. No
warranty can be claimed if the serial number on the units has been
changed, removed or rendered illegible. Any warranty claims will
be invalid if the unit has been repaired, altered or modified by the
buyer.
16.3 LCD defect policy
Despite the highest possible standards, the intricate
manufacturing of liquid crystal display (LCD) screens may still
produce slight visual imperfections. However, there will be
provided a warranty service for your Babyviewer LCD screen if
there are:
– 3 bright dots or 5 dark dots or 8 bright and/or dark dots in total; or
– 2 adjacent bright dots or 2 adjacent dark dots; or
– 3 bright and/or dark dots inside an area of 15mm diameter
These TFT LCD screen warranty conditions are offered by the
LCD manufacturers. Therefore, at its option, the
product will be repaired or replaced.
Please note: A bright dot is a white or sub-pixel that is always on.
A dark dot is a black or sub-pixel that is always off.
®
7