Descargar Imprimir esta página

SEVERIN FKS 8841 Instrucciones De Uso página 12

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 30
∙ Remove the plug from the wall
socket
- in case of any malfunction,
- before de-frosting,
- during cleaning,
- during maintenance/work on the
appliance.
∙ When removing the plug from the wall
socket, never pull on the power cord;
always grip the plug itself.
∙ During all cleaning and maintenance
work, the power plug must be pulled
out in such a way that the operator
can check from any place that the plug
is still removed.
∙ Warning! Do not remove the cover of
the LED interior lighting. Call customer
service in the event of a defect in the
LED light.
∙ If the unit is not used for an extended
period of time, we recommend
keeping the door open.
∙ At all times, make sure that there is
no risk of children playing with this
appliance, and becoming accidentally
trapped by it.
∙ We reserve the right to introduce
technical modifications.
12
Familiarisation
1.
Glass door
2.
Door handle
3.
Door lock with key set (door front)
4.
Adjustable feet
5.
Bottle rack bottom, 23 cm deep
6.
Bottle rack, 27-33 cm deep
7.
Bottle racks, 31-36 cm deep
8.
Fan
9.
Interior lighting on/off switch
10. Interior LED light
11. Temperature control knob
Before using for the first time
∙ Remove any exterior and interior packaging materials.
∙ Please ensure proper disposal of all packaging
materials.
∙ Clean the appliance as described under Defrosting and
cleaning.
∙ For positioning, we recommend that you tilt the unit
slightly backwards. In this way, the transport rollers can
be used to move it to its intended place of installation.
∙ The unit should only be transported in its vertical
position; do not tilt any more than 30°.
∙ Once the unit has been positioned, wait for about 30
minutes before it is connected to the mains.
∙ If the unit has been tilted more than 30° during transport,
allow it to stand upright for at least 4 hours before it is
connected to the mains.
∙ When the unit is first switched on, a slight 'new' smell
may be noticed. However, this will disappear once the
cooling process has begun.

Publicidad

loading