Bestron ABBQ2000S Manual De Instrucciones página 25

OPERATION - Grilling
1. Allow the grill plate to preheat (see 'Preheating').
2. If so required, grease the grill plate with a little oil.
3. Place the food you wish to grill on the grill plate.
4. Grill the food until it is cooked. Turn the food over occasionally whilst it is being grilled to ensure that both
sides are evenly cooked.
5. Remove the food from the grill plate and place on a plate. Take care! The food is hot.
OPERATION - After use
1. Turn the thermostat dial counterclockwise until it stops turning.
2. Remove the plug from the wall socket.
3. Let the appliance cool down fully.
4. Remove the thermostat by holding the appliance's handle with one hand and pulling the thermostat out
of the socket with the other hand. Make sure you do not touch the appliance's metal socket; it may still
be hot. Always hold the thermostat by the plastic section.
WARNING:
• The metal pin fitted to the thermostat can be very hot.
CLEANING AND MAINTENANCE
Clean the grill plate after each use.
1. Remove the plug from the wall socket, allow the appliance to cool down completely, and pull the
thermostat out of the socket.
2. Clean the grill plate and the base with a damp cloth, if necessary moistened with a couple of drops of
washing-up liquid.
3. Dry the grill plate and the base thoroughly.
4. Store the device in a dry and clean place.
WARNING:
• Verify that the appliance is not connected to the power supply before you start to clean it.
• Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
• Make sure the device completely cooled down.
• Never twist the cord around the appliance.
• Do not pull the cord. This can cause the cord to break
• Never immerse the socket, thermostat, plug or power cord in water or other liquid.
25
EN