Publicidad
Idiomas disponibles
Idiomas disponibles
To set an alarm image
You can set an image to be sent through FTP/Email(SMTP) or saved on the SDHC memory
card when an alarm is generated or during the scheduled transfer.
1
Click <EVENT> <ALARM IMAGE>.
The ALARM IMAGE SETUP window appears.
2
To complete the setting,
click the [Apply] button.
The settings are saved.
1. <Transfer Mode>: You can select a method to send an alarm image from the <FTP>, <E-Mail> and
<SD Card Record>.
- <FTP Transfer>: The image is sent to the specified FTP address.
- <E-Mail Transfer>: The image is sent to the specified Email address.
- SD Card Recording
Insert an SDHC memory card.
Configure the SDHC memory card (refer to page 56 for details).
Check the SD Card Recording option and then click on the [Apply] button. The SD indicator will
then turn on and recording will commence.
To remove the SDHC memory card, first uncheck the SD Card Recording option and then click on
the [Apply] button.
Removing the SDHC memory card while recording is in progress can damage the data.
2. <Transferred Image Naming Setup>: You can set the file name of an alarm image to be sent when
3. <Pre/Post Alarm Image>: You can determine which of previous or posterior image is to be sent.
- <Number of Image>: Determines number of images to be sent per second. You can select 1 or 2 images per
- <Pre-Alarm Duration>: Determines time of prior images to be sent. You can select <1 sec> or <3 sec>.
- <Post-Alarm Duration>: Determines time of posterior images to be sent. You can select <1 sec> or <3 sec>.
an alarm is generated or during the scheduled transfer.
second.
You can send a prior image of up to 3 seconds after an alarm is generated.
(The maximum time is determined by the number of images to be sent per second.)
You can send a posterior image of up to 3 seconds after an alarm is generated.
(The maximum time is determined by the number of images to be sent per second.)
1
2
3
_57
Setting Up
Publicidad
