Publicidad
Idiomas disponibles
Idiomas disponibles
7. Install the refrigerated door on the lower hinge, install the center beam screws,
middle hinge and tighten the screws on the left side, and cover the plug pins, center
beam screws and screw caps on the right side.
Middle hinge
Screw cap
EN
8. Install the freezing door on the middle hinge, remove the upper hinge shaft and
install it into the shaft hole on the other side of the hinge, install the upper hinge and
tighten the screws, and install the upper hinge cover and the right hole cover.
9. The door change is completed.
Hinge cover
Upper hinge
Remove the upper hinge shaft
and install it into the shaft hole
on the other side of the hinge.
ATTENTION
The picture above is only for reference. The actual configuration will depend on the physical
product or statement by the distributor.
Hole plug
Shaft sleeve
Left door
self-locking
Hole cover
08
Right door
self-locking
Stopper
Shaft sleeve
Plug pins
Center beam screw
Publicidad
