Publicidad
Idiomas disponibles
Idiomas disponibles
Operating instructions
Temperature setting
• Each time the temperature setting button A is pressed once,the temperature
setting changes one time. After the temperature setting has been completed,
the refrigerator will run according to the set value after 15s.
• When Super Cool mode is activated, the fridge will run at its maximum
capacity to faster reach the coolest setting and lasting longest for 6 hours.
The shift regulation is:
Note: The temperature of each gear is within 32 of the set temperature, and the actual
situation is slightly different according to the load situation.
Fault indication
• when electrify the refrigerator for first time,the display screen shines fully for
3 seconds, and then the refrigerator runs according to coldest. In case of a failure,
the corresponding LED blinks. In case of no failures, it shows the temperature setting
of refrigerator.
EN
Fault Code
LED1/LED2 flashing
LED1/LED3 flashing
LED1/LED4 flashing
Lock/Unlock
• When the temperature control panel is in lock state, it needs to long press
temperature setting key for 3 seconds for unlocking the panel, all LEDs will blink for
2 seconds when panel is unlocked. When the temperature control panel is in unlock
state, if there is no operation on control panel within 15 seconds, it will enter into
lock state automatically.
(normal)
Fault Description
Refrigerator temperature sensor fault
Freezing frost sensor faults
Ambient temperature sensor failure
12
Publicidad
