Publicidad
Idiomas disponibles
Idiomas disponibles
3
DRILL WALL ANCHOR HOLES
• Using a 1/2" drill bit, drill holes at the locations marked in step 1.
4
INSTALL WALL MOUNT
• Apply caulk to the back side of the WALL MOUNT (2).
• Push SCREWS (1) through WALL MOUNT (2) and thread on to ANCHORS (3).
• Push ANCHORS (3) through the two holes that were drilled in step 2.
• With ANCHORS (3) behind the finished wall, tighten SCREWS (1) to secure WALL MOUNT (2).
Note: Screw holes on the wall mount allow for some movement. Using the leveling bracket
before tightening the screws can help to ensure a more level install.
2
1
m m
3 0 . 5
m -
1 6 m
3
1 6 m
1
m m
3 0 . 5
m -
3
Publicidad
