Orascoptic Zeon Endeavour MD Instrucciones De Uso Y Mantenimento página 8

Connecting Your Zeon Endeavour MD Headlight to a Loupe or Other Eyewear
Secure the headlight cable to the temple arm of your frame by wrapping the spiral temple clip around both the temple
arm and cable. The cable also includes an adjustable gown clip to keep it out of the working area.
Spiral Temple Clip
8
INSTRUCTIONS FOR USE AND CARE
Orascoptic ™ Zeon ™ Endeavour ™ MD Portable LED Headlight
Thumb Screw
TTL Clip
Mounting Block
Jaw Mount
Thumb Screw
Jaw Clip
Mounting Screw Universal Mount
Use an optical screwdriver to loosen the mounting screw and open the mounting arms. Push the
universal mount down over the top of your frame with mounting clip in front of the carrier lens
and mounting arms behind the carrier lens. Center the universal mount over the bridge of your
Mounting
Arm
Mounting Clip
Through-the-lens (TTL) Mount
Slide the clip onto the mounting block and tighten the thumb screw on top. If a
mounting block is not attached to the bridge of your loupe frame, attach one using the
parts and instructions provided with your loupe connection kit.
Secure to the bridge of your frame by loosening the thumb screw on top to open the jaw
arms, then tighten the thumb screw to close the jaw arms over the top and bottom of
your frame bridge.
loupe frame and tighten the mounting screw until the device is secure.