Pioneer DEH-X8550BT Manual De Instrucciones página 13

Using this unit
Compatibility with all Android devices is not
guaranteed.
For details about Android device compatibility
with this unit, refer to the information on our
website.
Notes
! Please check our website for a list of sup-
ported smartphone applications for this unit.
! Pioneer is not liable for any issues that may
arise from incorrect or flawed app-based
content.
! The content and functionality of the sup-
ported applications are the responsibility of
the App providers.
Starting procedure for iPhone users
1 Connect an iPhone to the USB cable using
an iPhone Dock Connector.
2 Select Wired in APP CONNECT MODE. For
details, refer to APP CONNECT MODE (APP
connect mode setting) on page 17.
For DEH-X7550SD, skip to the next step.
3 Switch the source to Apps.
4 Start up the application on the smart-
phone and initiate playback.
Starting procedure for Android
device users
Only for DEH-X8550BT
1 Connect your Android device to this unit
using Bluetooth wireless technology. For de-
tails, refer to Connection menu operation on
page 10.
2 Select Bluetooth in APP CONNECT MODE.
For details, refer to APP CONNECT MODE
(APP connect mode setting) on page 17.
3 Switch the source to Apps.
4 Start up the application on the smart-
phone and initiate playback.
Basic operations
DEH-X8550BT
1
2 3 4 5
DEH-X7550SD
1
2 4 5 3
1 Application name
2 PLAY/PAUSE indicator
3 S.Rtrv indicator
Appears when Sound Retriever function is
on.
4 Song time (progress bar)
5 Play time indicator
Selecting a track
1 Turn LEVER.
Fast forwarding or reversing
1 Turn and hold down LEVER to the right or left.
Switching the display
Selecting the desired text information
% Press
/DISP.
Using this unit
Function settings
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select FUNCTION.
3 Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
Pause (pause)
1 Press M.C. to pause or resume.
Sound Retriever (sound retriever)
1 Press M.C. to select the desired setting.
1—2—OFF (off)
1 is effective for low compression rates, and 2
is effective for high compression rates.
Audio adjustments
1 Press M.C. to display the main menu.
2 Turn M.C. to change the menu option
and press to select AUDIO.
3 Turn M.C. to select the audio function.
Once selected, the following audio functions
can be adjusted.
! The cut-off frequency and output level can be
adjusted when the subwoofer output is on.
! SLA is not available when FM is selected as
the source.
Fader/Balance (fader/balance adjustment)
1 Press M.C. to display the setting mode.
2 Press M.C. to cycle between fader (front/rear)
and balance (left/right).
3 Turn M.C. to adjust the front/rear speaker bal-
ance.
Turn M.C. to adjust the left/right speaker bal-
ance.
Preset EQ (equalizer recall)
1 Press M.C. to display the setting mode.
2 Turn M.C. to select an equalizer curve.
Powerful—Natural—Vocal—Custom1—Cus-
tom2—Flat—SuperBass
G.EQ (equalizer adjustment)
You can adjust the currently selected equalizer
curve setting as desired. Adjusted equalizer curve
settings are stored in Custom1 or Custom2.
! Custom1 can be set separately for each
source. However, each of the below combina-
tions are set to the same setting automatically.
! USB, iPod, SD, and Apps (iPhone)
! BT Audio, and Apps (Android)
! Custom2 is a shared setting used in common
for all sources.
1 Press M.C. to display the setting mode.
2 Press M.C. to cycle between the following:
Equalizer band—Equalizer level
3 Turn M.C. to select the desired setting.
Equalizer band: 100Hz—315Hz—1.25kHz—
3.15kHz—8kHz
Equalizer level: +6 to –6
Loudness (loudness)
Loudness compensates for deficiencies in the low-
frequency and high-frequency ranges at low vol-
ume.
1 Press M.C. to display the setting mode.
2 Press M.C. to turn loudness on or off.
3 Turn M.C. to select the desired setting.
Low (low)—Mid (mid)—High (high)
Section
02
13
En