Descargar Imprimir esta página

Car and Driver EYE2PRO CDC-E4000 Manual De Usuario página 14

Publicidad

Idiomas disponibles

Idiomas disponibles

WDR
The WDR (Wide Dynamic Range) on the device improves the camera's image quality
under high-contrast lighting conditions where both dimly and brightly lit areas are
present in the field of view. It enables the camera to capture details clearly in both the
poorly and strongly illuminated areas of the video. The default setting is on.
Parking Monitor
If the parking monitoring mode is turned on, the device will power off automatically. If
your vehicle is involved in a hit and run while parked, the device will automatically start
up for 15 second recording, then automatically power off again. When the car starts up,
the device will restart continuous recording. It can provide around-the-clock protec-
tion and surveillance for the vehicle.
G Sensor
If the G Sensor is turned on, any hard braking/shock/vibration that occurs during
recording device will be automatically locked, ensuring it will not be overwritten.
(Options: Off/Low/Medium/High)
Sleep Timer
Set the Sleep timer (Off, 1 Min., 3 Min.,5 Min., 10 Min.) in standby mode. If you set the
Sleep timer to 3 minutes, the Dash Cam will automatically enter sleep mode after 3
minutes of inactivity.
13
EN

Publicidad

loading