Publicidad
Idiomas disponibles
Idiomas disponibles
2. Find a good spot on the windshield to install the Dash Cam, and clean the area.
NOTE: The view should be unobstructed, and not blocking the drivers view of the road.
3. Press the mounts Suction Cup into the windshield, and turn the lock clockwise to
secure it in place.
4. Turn the knob of the mount to adjust the camera's angle. Make sure the Dash Cam
remains level with the vehicle and the road. Turn the Dash Cam on to check the camera
angle.
Lock
Method 2:
Mounting your Dash Cam with
1. Unscrew counterclockwise to remove the suction cup from the mount.
2. Attach the 3M Adhesive Mount to the magnetic mount, and make sure the
screw holes are aligned. Screw them tightly counterclockwise.
3. Angle the mount so that it can slide into the magnetic
slot on top of the camera. Align the magnets of the
mount with the camera's magnetic contacts and slide
it into place. Then remove the protective film from the
camera lens and the protective film from the suction
cup.
Suction
Cup
Knob
1
3M Adhesive Mount
6
EN
.
2
Publicidad
