Publicidad
Idiomas disponibles
Idiomas disponibles
ATTACHING MONITOR PLATE
1.
Determine the hole pattern on the back of the
monitor. If the hole pattern is larger than the monitor
plate, the monitor adapters must be attached using
M6 x 6 mm bolts (B4). (See Figures 7-8)
Figure 7
200 mm
400 mm
300 mm
200 mm
Figure 8
PAGE 3 OF 12
INSTALLATION CONTINUED
200 mm
300 mm
400 mm
300 mm
400 mm
Adapter
M6 x 6 mm
Bolt
4 x 4 mm
Allen Wrench
2. Determine bolt size that is compatible with monitor.
Using the square washers (A6) and spacers (A5),
install the monitor plate to the monitor.
SQUARE WASHER
Small hole for M4 screws (A1)
Medium hole for M5 and M6 screws (A2, A3)
Large hole for M8 screws (A4)
NOTE: For monitors with flat backs, use
spacers (A5) on the outside of brackets.
(See Figure 9)
Figure 9
Monitor Plate
NOTE: For monitors with a curved back or
obstructions, place spacers (A5) on the side
closest to the monitor. (See Figure 10)
Figure 10
Spacer
Spacer
Square Washer
Square
Washer
Monitor
Plate
0223 IH-10161
Publicidad
